A mobile concrete mixer pump is becoming increasingly common as civil engineering develops rapidly around the world. The pump, as a construction machine, considerably improves the productivity of concrete mixing and laying work, freeing employees from tedious, sluggish human labor. You should be familiar with the rules and regulations before using a mixer concrete pump truck for official work. As such, here are some guidelines:
1. Wear Personal Protective Equipment (PPE) at all times
Working near a concrete mixer pump for sale in Thailand necessitates the use of personal protective equipment (PPE). Safety glasses, a hard hat, ear protection, and rubber gloves are among the items required. When operating near the hopper, these are extremely necessary. Below are some of the reasons why this is so important.
2. Be aware of the risk of electrocution.
If the pump is turned on, the electricity will pass through the concrete in the hopper and power the mixer truck. You could therefore be electrocuted if you touch your truck or the pump. Keep an eye on the boom’s movements and notify the operator if it gets closer than 20 feet to an electrical wire (50 feet when the voltage exceeds 350 kV).
3. The dangers of projectiles are extremely real.
When the pipeline is being opened, stay away. Concrete will be discharged with dangerous velocity if the pressure remains when the pipeline is opened, or if a clamp or pipe breaks. As a result, the momentum could easily hit and injure you. Keep in mind that as a pump operator, you are responsible for safely removing pressure from the line. Wear protective eyewear if you’re near a pipeline.
Also, avoid touching any concrete pump pipe hoses or clamps. If you see an issue, notify the operator. Before looking in the hopper, you should always put on your safety glasses. Furthermore, when monitoring the hopper, maintain a safe distance and never peer into the end of a connected pipe or hose. You could be hit by a discharge of inconceivable force, resulting in harm.
4. If you do not follow these guidelines, you may easily fall.
When a concrete pipeline is in use, never stand on it or walk across it. Concrete pumps can generate pipeline pressures of more than 1000 pounds per square inch. Pipelines might move without warning, so keep that in mind.
When getting on or off the pump, remember the “three-point rule.” It states that 2 feet and 1 hand or 2 hands and 1 foot must always be in contact with a stable surface. You will be safe in this manner. Note that you should avoid getting on the pump unless it’s absolutely necessary.
5. Concrete pumps and trucks have crushed people before.
Never go in the way of a mixer truck or a diesel concrete pump. In fact, you should never allow anyone else to stand between the pump and the mixer truck. If more than 1 truck is delivering to the pump hopper, double-check that no one is caught between the pump or trucks to avoid crushing accidents.
To be safe, stay at least 10 feet away from the pump unless you can see the spotter who is instructing you. Stop quickly if you lose sight of the spotter while driving. You should never back up again until your line of sight has been restored. Finally, the spotter must provide clear and concise hand signals when backing up to the pump hopper. Stop immediately if you don’t comprehend the hand signs.
Wind Up
A pump machine is not like a person who speaks your language; to run it, you must first grasp the guidelines. The safety regulations for a concrete pump from Aimixthailand.Com, in particular, not only protect you but also lower the failure rate. The first step in obeying safety standards and preventing accidents is to be aware of the importance of such guidelines: they save lives.
Before, during, and after the pumping work, there are safety rules that you should familiarize yourself with. These are some of the safety tips that will come in handy, particularly for ready-mix concrete truck drivers who deliver to concrete pumps. There are many more, but these five have the potential to save lives!